 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
 | |  | |  |
 |
| |
 |
| |
 |
| |
 |
| |
 |
Products
WARNING:
1. ALWAYS use a cover when using a Snappi® fastener on your baby’s diaper.
2. Keep out of children’s reach when not in use!
3. Do not use your Snappi® for longer than 6 months.
4. Do not leave your Snappi® lying in the sun as it is not UV resistant and can reduce the
effectiveness of the Snappi®.
CARE: Clean your Snappi® in hot soapy water. Do not launder them with diapers in the
washer as this may weaken the grip attachment.
CAUTION: Any tear in the Snappi® can lead to separation of a piece, presenting a
possible choking hazard. Do not cut your Snappi® as this could create weak spots in your
Snappi®. Inspect your Snappi® before each use and discontinue use immediately if there
is any sign of cracking, tearing, breakage or wear of the teeth or any other parts.
DIRECTIONS FOR USE:
Snappi® fasteners need to be used correctly in order to work effectively.
1. STRETCH the Snappi® fastener before its first use. The stretching triggers the 'memory'
of the Snappi® to return to its original size and in so doing, pulls the diaper together to the
middle to allow for a snug fit. This is essential for the Snappi® to work properly. This can
be done by holding the Snappi® in the center with one hand and close to the end of the leg
with the other hand. Then s-t-r-e-t-c-h a few times (10 or so). As you do this you should feel
how the material 'softens' or gets more elastic. Follow this stretching procedure with each
leg. The Snappi® is now ready to go!
2. Make sure that the Snappi® is ATTACHED SECURELY. It is important that the Snappi®
'leg' being attached be stretched across the diaper before hooking it into the diaper. So,
Hook Left,
Stretch ACROSS and Hook Right,
Stretch DOWN and Hook Center
In other words, the Snappi® fastener should go from a ‘T’ shape to a ‘Y’ shape.
By following these instructions, the Snappi® should be secure, the diaper will fit snugly
and the baby should not be able to undo it. ALWAYS place a cover over the diaper and
Snappi® fastener.
1. ALWAYS use a cover when using a Snappi® fastener on your baby’s diaper.
2. Keep out of children’s reach when not in use!
3. Do not use your Snappi® for longer than 6 months.
4. Do not leave your Snappi® lying in the sun as it is not UV resistant and can reduce the
effectiveness of the Snappi®.
CARE: Clean your Snappi® in hot soapy water. Do not launder them with diapers in the
washer as this may weaken the grip attachment.
CAUTION: Any tear in the Snappi® can lead to separation of a piece, presenting a
possible choking hazard. Do not cut your Snappi® as this could create weak spots in your
Snappi®. Inspect your Snappi® before each use and discontinue use immediately if there
is any sign of cracking, tearing, breakage or wear of the teeth or any other parts.
DIRECTIONS FOR USE:
Snappi® fasteners need to be used correctly in order to work effectively.
1. STRETCH the Snappi® fastener before its first use. The stretching triggers the 'memory'
of the Snappi® to return to its original size and in so doing, pulls the diaper together to the
middle to allow for a snug fit. This is essential for the Snappi® to work properly. This can
be done by holding the Snappi® in the center with one hand and close to the end of the leg
with the other hand. Then s-t-r-e-t-c-h a few times (10 or so). As you do this you should feel
how the material 'softens' or gets more elastic. Follow this stretching procedure with each
leg. The Snappi® is now ready to go!
2. Make sure that the Snappi® is ATTACHED SECURELY. It is important that the Snappi®
'leg' being attached be stretched across the diaper before hooking it into the diaper. So,
Hook Left,
Stretch ACROSS and Hook Right,
Stretch DOWN and Hook Center
In other words, the Snappi® fastener should go from a ‘T’ shape to a ‘Y’ shape.
By following these instructions, the Snappi® should be secure, the diaper will fit snugly
and the baby should not be able to undo it. ALWAYS place a cover over the diaper and
Snappi® fastener.
Information